Vertical Wrap Single Jersey Knitting Machine

Vertical Wrap Single Jersey Knitting Machine

Introduction

SH-VW1 vertical wrap single jersey knitting machine is one of our main products. From 1989 we got patents to now, we had invested much money & many engineers to improve it continuously. Especially the revolutionary improvement of gear plate. Its special vertical wrap construction upgrade speed and production capacity can make high value of fabrics and raise profits for the customers.

Specification

Specification	SH-VW1
Diameter	26", 30"
Feeder	3,4 Feeds / Rer Inch.
Gauge	14G~32G.

No. of Needles in Cylinder & Dial (standard)

DIA.	Gauge	No. of Needles	Max. No. of Vertical Lines	No. of Needles Between Wrapping Finger	Max. No. of Needles in Wrapping Range
26"	16G	1320	160	8	1~4
	18G	1500	160	9	1~5
	20G	1620	160	10	1~5
	22G	1800	160	11	1~6
	24G	1920	160	12	1~6
	26G	2100	160	13	1~7
	28G	2280	160	14	1~8
	30G	2400	160	15	1~8
	32G	2640	160	16	1~9
30"	16G	1500	180	8	1~4
	18G	1680	180	9	1~5
	20G	1860	180	10	1~5
	22G	2040	180	11	1~6
	24G	2280	180	12	1~7
	26G	2400	180	13	1~7
	28G	2580	180	14	1~8
	30G	2880	180	16	1~9
	32G	3000	180	17	1~9

6-track cam holder which can knit jacquard fabric with vertical strip is available on customer's requirement. This model is SH-VW1A.

Performance Features

Gear-driven use English-made healy wire race bearings. In long time & high speed operation, all roller balls receive fully lubrication which can decrease operating temperature. This can extend usable machine life.

This machine adopts central stitch control system, speedy for changing stitch and weight per yard. No looseness even under prolonged operation.

Computer-milled cam holder has accurate graduation for numerical adjustments which assures 100% setting accuracy in long-time running.

12 sets vertical wrapping dial separate upper & lower 2-track route, it is easy to change the cam and save the changing time. With stop motion device that can avoid the yarns to be polluted or cross while in operation. The yarn thread guided by air gun, time-saving and labor-saving.

Equipped with a gear-driven revolving bar which can be fitted 180 vertical yarns.(This machine can be fitted at least 180 vertical yarns)

Equipped with 180 pieces wooden bobbin which can match with any color of yarn.

4-track type cam holder sets enable owners to have many uses, no need to purchase redundant machines.

Touch- type control panel with speed meter & three-shift counter which can show the daily production .

Taiwan-made lubricator is standard. MEMMINGER PULSONIC and UNIWAVE QUANTUM lubricators are optional.

With two American type handle bars on the machine's frame, easy to operate & change cams.

Use national standard TATUNG motors.

Japanese TOSHIBA or MITSUBISHI inverter is standard.

60-step take-down device is standard, electric type or folding type is optional.

Fence-type safety gates with sensor switch which will stop the machine as soon as the gate is opened.

Machine Speed (Standard)

DIA.	Gauge	No. of Feeder	R.P.M.
26"	24G	78F	22
30"	24G	90F	20

Speed indicated in table was tested with TC30/S yarn, 24G and 135 pieces vertical wrapping yarns. Optimum speed depends upon yarn, gauge and needle oil used. Above table for reference only.

Production at 100% Efficiency

No. of weft feeds × machine speed (r.p.m)×60 mins ＝yarns/meters
Per hour C.P.I./C.P.CM×36"(per yard) 100cm (per meter)
E.g. 30" machine, 28 N.P.I. Set up for 129 vertical pattern lines (129 wrap yarn feeds) utilizing 60 weft knit feeds 15 N.P.M. For a typical fabric production at 40 C.P.I/16 C.P.CM

60×15×60
	= 37.5 Yards / Hour or
40×36

60×15×60
	= 54 Meters / Per Hour
10×100

Bobbin Rack Drive (Standard)

Adopts TAIWAN-made positive feeders-double layer, gear-type, 24V.

Memminger MPF 20K-1/24V positive storage is optional.

Memminger D/8 type tube creel is standard, other over head creel or filter creel are optional.

We also supply the winder machines & yarn-connecting devices (NOTTER) on customer's requirement.